DJI Matrice 200 V2 with Zenmuse XT S

Save $1,000 for a limited time

The Matrice M200 V2 with Zenmuse XT S thermal camera is a complete aerial thermal solution fit for tasks that requires gathering more actionable data beyond visual capabilities.


All orders placed before 2pm will be delivered the next day on overnight track and trace courier. Larger items will be sent on a two day service to the South Island. Please note rural addresses (RD) can take 1-3 days longer.




The Matrice 200 Series V2 bring new and improved features to DJI’s leading drones for commercial and industrial tasks. The second generation model retains its rugged all-weather design, simple setup and easy configuration while upgrading key systems to provide safer, more reliable, and more secure operation. Improvements to this platform lay the technical foundation for more advanced commercial drone operations including nighttime and BVLOS flights. From construction and infrastructure inspection to public safety and search and rescue, the Matrice 200 Series V2 provides a versatile platform for organizations ready to transform their daily operations with drone technology.


Flight Time

Operation Range

Ingress Protection

Max Payload Capacity

38 min 8km IP43




New Key Features


Reliable Transmission

Equipped with OcuSync 2.0, the drones now support automatic dual frequency band switching between 2.4GHz and 5.8GHz for up to 8 km maximum transmission range, delivering reliable, high-resolution, low-latency digital video transmission back to the pilot.


Data Security

All data transmitted through OcuSync 2.0 is encrypted using the leading AES-256 standard, ensuring critical mission information is protected and can only be accessed by authorized parties.



Flight Safety

Designed with U.S. Federal Aviation Administration Night Waiver standards in mind, anti-collision beacons have been added on the top and bottom of the drone to improve flight safety during low-light conditions and at night. The drone is also equipped with DJI’s AirSense system using an ADS-B receiver to provide drone pilots with awareness of approaching air traffic that may pose a collision risk.



Flight Performance

A new TimeSync system continuously aligns the flight controller, cameras, GPS module and RTK module, as well as any third-party payloads or onboard accessories, fixing the position data to the centre of the image frame to achieve improved data accuracy.


Anti-Collision Beacon

Equipped with new top and bottom anti-collision beacons, the V2 drones are visible at night or in lowlight conditions, making operation in less than ideal conditions safer.


Data Accuracy

Equipped with OcuSync 2.0, the drones now support automatic dual frequency band switching between 2.4GHz and 5.8GHz for up to 8 km maximum transmission range, delivering reliable, high-resolution, low-latency digital video transmission back to the pilot.


Obstacle Avoidance

A robust FlightAutonomy system with front, bottom and upper sensors detect and avoids obstacles while enabling precision hovering so that you can fly with confidence.


Compatible Payloads



The  V2 series is still capable of  using third-party payloads



Flight time based on payload configuration




Intelligent Flight Modes 

ActiveTrack: Keep moving subjects in a frame while you fly with ease to capture detailed data. Perfect for keeping track of missing persons while you relay their position to a rescue team.
Point of Interest: Easily circle your object of interest to focus on capturing the data needed for a detailed inspection.
Obstacle Avoidance: A robust FlightAutonomy system with front, bottom and upper sensors detect and avoid obstacles while enabling precision hovering so that you can fly with confidence.



Powered by TB55 batteries to properly support a dual gimbal configuration and increase flight times.
Dual batteries for improved reliability 
Self-heating encasing for flight in sub-zero temperatures



Power Line Inspection: Easily visualize extensive power line networks in remote areas. 
Search and Rescue: Act quickly to locate missing people and better plan rescue missions. 
Wind Turbine Inspection: Conduct safe and rapid wind turbine inspections with more ease than ever before. 
Bridge Inspection: Perform inspections of bridges and complicated structures with a top-mounted camera. 



FPV Camera
Anti-collision Beacon
Discreet Mode
Mobile SDK Compatibility
DJI SkyPort Compatibility



The Zenmuse XT S features a thermal imaging sensor with high thermal sensitivity and resolutions for clear and detailed thermal imagery. It enables Fire & Rescue, law enforcement and asset inspectors to gather intel beyond the capabilities of visual data, and act on them quickly saving time, money and lives.


Thermal sensitivity


Focla Length

Ingress Protection

< 40 MK 640x512 @ 25 Hz 19mm Level IP44 



Spot Meter

Tap a point for real-time temperature measurements


Area Measurement

Select an area to get the max, min and average temperatures.


Intelligent Features


Temp Alarm

Receive instant notifications in DJI Pilot when object temperatures exceed your preset alert values.

Colour Palettes

Adjust the colours applied to the thermal data based on the needs of specific scenarios.

R-JPEG Images

Images captured by the Zenmuse H20T are in the R-Jpeg format with embedded temperature information. By importing these images into DJI Thermal Analysis Tool, you can measure temperature, and adjust parameters such as Emissivity, and Reflected Temp.


Visualize a specific band of temperatures to find what is important.


Product Specifications


Aircraft: M200 V2
Dimensions Unfolded: propellers and landing gears included, 883×886×398 mm
Dimensions Folded: propellers and landing gears excluded, 722×247×242 mm
Diagonal Wheelbase: 643 mm
Weight: Approx. 4.69 kg (with two TB55 batteries)
Max Takeoff Weight: 6.14 kg
Max Payload: 1.45 kg
Operating Frequency: 2.4000-2.4835 GHz; 5.725-5.850 GHz
2.4 GHz: ≤ 26 dBm (NCC/FCC); ≤ 20 dBm (CE/MIC); ≤ 20 dBm (SRRC)
5.8 GHz: ≤ 26 dBm (NCC/FCC); ≤ 14 dBm (CE); ≤ 26 dBm (SRRC)
Hovering Accuracy (P-mode with GPS):
Vertical:±1.64 feet (±0.5 m) or ±0.33 feet
(±0.1 m, Downward Vision System enabled)
Horizontal: ±4.92 feet (±1.5 m) or ±0.98 feet (±0.3 m, Downward Vision System enabled)
Max Angular Velocity: Pitch: 300°/s, Yaw: 120°/s
Max Pitch Angle: S-mode: 35° | P-mode: 30° (Forward Vision System enabled: 25°) | A-mode: 30°
Max Ascent Speed: 16.4 ft/s (5 m/s)
Max Descent Speed (vertical): 9.8 ft/s (3 m/s)
Max Speed: S-mode/A-mode 81 kph (50.3 mph) | P-mode: 61.2 kph (38 mph)
Max Service Ceiling Above Sea Level: 9842 feet (3000 m, with 1760S propellers)
Max Wind Resistance: 39.4 ft/s (12 m/s)
Max Flight Time (with two TB55 batteries): 38 min (no payload) | 24 min (takeoff weight: 6.14 kg)
Supported DJI Gimbals: Zenmuse X4S/X5S/X7/XT/XT2/Z30
Supported Gimbal Mounting: Single Gimbal, Downward
Ingress Protection Rating: IP43
Operating Temperature: -4° to 122° F (-20° to 50° C)


Remote Controller (GL900A)

Operating Frequency: 2.4000-2.4835 GHz | 5.725-5.850 GHz
Max Transmitting Distance(unobstructed, free of interference): NCC/FCC: 5 mi (8 km) | CE/MIC: 3.1 mi (5 km) | SRRC: 3.1 mi (5 km)
EIRP: 2.4 GHz: ≤ 26 dBm (NCC/FCC); ≤ 20 dBm (CE/MIC); ≤ 20 dBm (SRRC) | 5.8 GHz: ≤ 26 dBm (NCC/FCC); ≤ 14 dBm (CE); ≤ 26 dBm (SRRC)
Power Supply: Extended Intelligent Battery (Model: WB37-4920mAh-7.6V)
Output Power (max): 13 W (Without supplying power to monitor)
USB Power Supply: 1 A⎓ 5.2 V (max)
Operating Temperature: -4° to 122° F (-20° to 50° C)


Downward Vision System

Velocity Range: <32.8 ft/s (10 m/s) at the height of 6.56 feet (2 m)
Altitude Range: <32.8 feet (10 m)
Operating Range: <32.8 feet (10 m)
Operating Environment: Surfaces with clear patterns and adequate lighting (> 15 lux)
Ultrasonic Sensor Operating Range: 0.33-16.4 feet (0.1-5 m)
Ultrasonic Sensor Operating Environment: Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance)


Forward Vision System

Obstacle Sensing Range: 2.3-98.4 feet (0.7-30 m)
FOV: Horizontal 60°; Vertical: 54°
Operating Environment: Surfaces with clear patterns and adequate lighting (> 15 lux)


Upward Infrared Sensing System

Obstacle Sensing Range: 0-16.4 feet (0-5 m)
FOV: ±5°
Operating Environment: Large, diffuse and reflective obstacles (reflectivity >10%)


Intelligent Flight Battery (TB55-7660mAh-22.8V)

Capacity: 7660 mAh
Voltage: 22.8 V
Battery Type: LiPo 6S
Energy: 174.6 Wh
Net Weight (Single One): Approx. 885 g
Operating Temperature: -4° to 122° F (-20° to 50° C)
Charging Temperature: 41° to 104° F (5° to 40° C)
Max Charging Power: 180 W


Charger (IN2C180)

Voltage: 26.1 V
Rated Power: 180 W


Charging Hub (IN2CH)

Input Voltage: 26.1 V
Input Current: 6.9 A




Weight:  387 g
Dimensions: Zenmuse XT S: 105×101×83 mm
Ingress Protection Rating: IP44
Operating Temperature: -20° to 50° C (Temperature Measurement is only available between -10° to 50° C)
Storage Temperature: -20° to 60° C
Supported Aircraft: Matrice 300 RTK, Matrice 200 series, Matrice 200 V2 series, 



Angular Vibration Range: ±0.025°
Mount: Detachable
Controllable Range
Pitch: -120° to +30°
Yaw: ±320°
Mechanical Range
Pitch: -135° to +45°
Yaw: ±330°
Roll: -90° to +60°


Thermal Camera

Sensor: Uncooled VOx Microbolometer
DFOV: 40.6°
Focal length: 19 mm
Aperture: f/1.0
Video Resolution: 640×512 @ 25 Hz
Video Format: MP4
Image Resolution: 640×512
Image Format: JPEG, R-JPEG
Pixel Pitch: 17 μm
Spectral Band: 8-14 μm
Sensitivity (NETD): ≤40 mK @ f/1.0
Temperature Measurement Method: Spot Meter, Area Measurement
Scene Range
-40 °C to 150 °C (High Gain)
100 °C to 550 °C (Low Gain)
Temperature alert: Supported
Palette: White-hot/Fulgurite/Iron Red/Hot Iron/Medical/Arctic/Rainbow 1/Rainbow 2/Tint/Black Hot


In the box

Aircraft Body x 1
Cendence Remote Controller x 1
Landing Gear x 2
Propellers (Pair) x 4
Intelligent Flight Battery (TB55) x 2
Battery Charger x 1
Charging Hub x 1
Power Cable x 1
USB Cable (with double A ports) x 1
16GB microSD card x 1
Carrying Case x 1
Gimbal Damper x 3
Propeller Mounting Plates x 1
Vision System Calibration Plate x 1
Battery Insulation Sticker x 4
Zenmuse XT S Thermal Camera x 1


By buying from Ferntech, you'll have the confidence that you are dealing directly with New Zealand's leading drone experts. Our staff are knowledgable drone pilots who offer expert advice, trusted support and superior specialist service. Only through us will you receive a full New Zealand warranty, phone and email support, and access to our certified Repairs Centre with DJI-qualified drone technicians. And we guarantee that we will have the best prices on the market — if not let us know and we will match any price (conditions apply).


Warranty Details

MC: 12 Months
Battery: 12 Months
Battery Charger: 12 Months
Battery Charging Hub: 12 Months
Propeller and Propeller Mounting Plates: No Warranty
Remote Controller: 12 Months
Frame: No Warranty
Gimbal Mounting Connector: No Warranty


What is the flight time of the M200 Series V2 drones?

No payload: M200 V2: 38 minutes, M210 V2: 34 minutes, M210 RTK V2: 33 minutes. 
Full payload: M200 V2/M210 V2/M210 RTK V2: 24 minutes.

How long does it take to fully charge the TB55 Intelligent Flight Batteries of the M200 Series V2 drones?

When using an IN2CH Charging Hub, it takes 2 hours and 24 minutes to fully charge 2 TB55 batteries.

How do I maintain the TB55 Intelligent Flight Batteries?

1. To get the best performance of the batteries, it is recommended to mark 2 batteries as a pair before first use and continue using them as a pair (charge and discharge them together). 
2. The ideal storage temperature for the batteries is between 22℃- 30℃. Do not store in humid places. 
3. If not using the batteries for more than 10 days, discharge the batteries to 40%-65% of charge to store, charge and discharge them every 3 months to keep them fresh.

Can the TB55 Intelligent Flight Batteries be used in low-temperature environments?

The operating temperature of the TB55 Intelligent Flight Batteries is -20℃ to 50℃. Please note that flight time will decrease when using in cold environments. It is recommended to preheat the batteries to 15℃ before the flight to ensure flight performance.

Can the TB55 Intelligent Flight Batteries be taken onto a flight in the carry-on baggage?

The battery has a capacity of 174.6Wh. Please follow the regulations and guidelines for travelling with these batteries via air.

Do the M200 Series V2 drones support TB50 batteries?

No, they do not.



What is the maximum takeoff weight of the M200 Series V2 drones?


What are the maximum payload weights of the M200 Series V2 drones?

When using TB55 Intelligent Flight Batteries: M200 V2: 1.45kg; M210 V2: 1.34kg; M210 RTK V2: 1.23kg.


Remote Controller

How long does it take to fully charge the remote controller?

It takes around 2 hours to fully charge a single WB37 Intelligent Battery that is installed in the remote controller, and around 1 hour and 11 minutes using the WCH2 Charging Hub.

How long does a fully charged WB37 battery last?

Up to 4 hours of continuous use when not powering a display monitor.

Can the M200 Series remote controller be used for the M200 Series V2?


How are the remote controllers for V1 and V2 drones different visually?

There is a silver ring mark on the monitor mounting bracket on the M200 Series V2 remote controller, and on the back of the bracket, there is a USB port.

What is the operating temperature of the remote controller?

The operating temperature is -20℃ to 50℃.

What output interfaces does the remote controller have?




What transmission system is used in the M200 Series V2 drones?

OcuSync 2.0 transmission.

What is the actual transmission distance?

The actual transmission distance depends on the local communications standards. 
Under some common regulatory bodies, examples of the transmission range are as follows: 
FCC: 8km 
CE/MIC: 5km 
SRRC: 5km


Gimbal Camera

What is the resolution of the FPV camera?

608 x 448.

What gimbal cameras are compatible with the M200 Series V2 drones?

Zenmuse X4S/X5S/X7/XT/XT2/Z30.

What dual gimbal combinations are supported by the M210 V2/M210 RTK V2?

Please refer to the following table for an explanation of how to properly mount your dual gimbal configuration. Left and right is determined from the perspective of looking directly at the drone from the front. 
Right gimbal port: Zenmuse X4S/X5S/X7/XT/XT2/Z30, 
Left gimbal port: Zenmuse XT/Z30.

Can the two downward gimbal cameras be controlled simultaneously on the M210 V2/M210 RTK V2?

Yes, you can control the gimbal angles of both payloads and take still photos or videos using both.

Which gimbal cameras are supported in the upward gimbal mount of the M210 V2/M210 RTK V2 drones?

The upward gimbal port supports the Zenmuse X4S/X5S/X7/XT/XT2/Z30.

What upward+downward gimbal configurations are supported by the M210 V2/M210 RTK V2 drones?

Upward gimbal mount: Zenmuse X4S/X5S/X7/XT/XT2/Z30. 
Left downward gimbal port: Zenmuse XT/Z30.

Can the upward and downward gimbal cameras be controlled simultaneously on the M210 V2/M210 RTK V2?

No, they cannot.

Can I adjust the FPV camera's angle using the remote controller?

This function is currently not supported.

Which formats are supported by the Zenmuse X7 gimbal camera?

Still photography: JPEG/RAW/JPEG+RAW. 
Video: MP4/MOV.



How are the M200 Series and M200 Series V2 drones different visually?

The M200 Series V2 drones have new anti-collision beacons on the aircraft shell and at the bottom of the battery compartment. The V2 arm lights are equipped with optical lenses, and the engraving on the body of the drone shows V2.

Can I switch the dual downward gimbal connector on the M210 V2/M210 RTK V2 to a single downward gimbal connector?


What is the hovering precision of the M200 Series V2?

M200 V2/M210 V2 in P-mode with GPS: vertical: ±0.5m (±0.1m when Downward Vision System enabled). Horizontal: ±1.5m (±0.1m when Downward Vision System enabled). 
M210 RTK V2 with RTK enabled on: vertical ±0.1m, horizontal ±0.1m.

What is the Ingress Protection rating of the M200 Series V2 drones?

IP43, means that the Matrice 200 Series V2 can be protected from objects greater than 1 millimetre, and from water spray less than 60 degrees vertically. The IP43 protection rating can protect the Matrice 200 Series V2 when used in adverse environments with dust particles or light showers. 
Note: The protection rating may reduce or fail in case of folded-frame arms, exposed ports as a result of open cover, loose weatherproof shell top plugs, and if the aircraft is broken.

Does my purchase of an M200 Series V2 drone come with a Micro SD card?

Yes. A 64GB Micro SD card is included.



What do I need to fully utilize the RTK functions of the M210 RTK V2?

The performance and accuracy of the RTK functions can be enhanced with real-time differential correction using the DJI D-RTK2 High Precision GNSS Mobile Station For Matrice Series, which can be purchased separately.

Does the M210 RTK V2 support Post Process Kinematic (PPK)?

Yes, this means location data can be corrected after the drone data has been captured during flight.

What is the ingress protection rating of the DJI D-RTK2 High Precision GNSS Mobile Station For Matrice Series?


Which SDKs are supported by the M200 Series V2?

M210 V2/M210 RTK V2 supports the OSDK, PSDK and MSDK. M200 V2 supports PSDK and MSDK.

How do I get technical support for SDKs?

Please contact



What apps and software are supported by the M200 Series V2?

Currently supports DJI Pilot. Support for GS Pro is coming soon.

There's currently no reviews for this product, be the first to write one.

Write a product review