Gremsy Gimbal S1 (V3)
Integrated quick release. Extended pan rotation. Upgraded motor power. Meet S1V3 - the most lightweight yet multi-load gimbal for mappers, surveyors and industry experts in any aerial missions.
Features
Integrated quick release. Extended pan rotation. Upgraded motor power. Meet S1V3 - the most lightweight yet multi-load gimbal for mappers, surveyors and industry experts in any aerial missions.
HDMI Hyper Quick Release
HIGH-SPEED HDMI TRANSMISSION
The new quick-release having floating connectors not only allows quick assembly with many platforms but also ensures high-speed HDMI transmission after thousands of mating cycles.
HOT SWAP
Changing payloads on your drone in a matter of seconds.
With hot-swap capability on the quick release, it is easier than ever to swap out among Gremsy gimbals. (S1V3, T3V3, T7)
20% Increase in Motor Power
Thanks to the built-in 14.5 Volt power regulator, the S1V3 comes with a 20% increase in motor power, strengthening the stability of your system even in harsh environments.
± 345° Pan Rotation
More freedom to move. Better performance in the air. Large pan rotation enables the best possible results in inspection or mapping missions.
Your device hub
I/O ports including USB, Sbus, AUX, COM, HDMI, JR, POWER, CAN, USB have all been located on the quick release for easy and intuitive connection with external devices and third-party products.
Clean and solid design
No wires. No hassle. The clean and solid design ensures reliable and long-term operation for many applications.
Flexibility in camera mounting
The crossbar is engineered with 2 slots for flexibly mounting your camera, whether large or small one.
Camera compatibility
Mapping Mode
Gremsy S1 is a comprehensive solution for reliable aerial mapping and inspection applications specialized for a single operator. Smart mapping mode allows customers to define the home position which with be aligned with the nose direction of the aircraft and tilted down 90 degrees.
Product Specifications
Dimensions and Camera Cage
General
Operation Modes
Motor ON/OFF
Lock mode
Follow mode / Mapping mode
Iverted mode
Temperature Sensor
Gremsy Specialized Gimbal Drive Motors with Encoders
Micro USB Connection
Gremsy Advanced 32-Bit high performance ARM microprocessor
S-Bus/Spektrum/PPM Receiver Supported
Mechanical & Electrical Characteristics
Working Current
Static current: 300mA/14.5V
Dynamic current: 600mA/14.5V
Locked motor current: 4A/14.5V
Operating temperature: 0° C - 50° C
Weight: 830 g
Gimbal Dimensions: 150(W) x 168(D) x 220(H)
Peripheral
Camera Tray Dimensions:
Maximum depth from the center of gravity on camera base plate: 65mm
Maximum height measured from top of camera base plate: 75mm
Maximum width: 120mm
Input Power: 15-52V
Connetions: USB 2.0, CAN, UART, S-bus, Spektrum, PPM, Bluetooth
PC Assistant Software Requirements: Windows XP or above; Mac OS X 10.9 or above
Mobile Assistant Software Requirements: iOS 7.1 or above; Android 4.3 or above
Working Performance
Maximum Payload: 750 g
Angular Vibration Range: ± 0.02°
Maximum Controlled Rotation Speed:
Pan axis: 180°/s
Tilt axis: 180°/s
Roll axis: 180°/s
Mechanical Endpoint Range:
Pan axis control: ±345°
Tilt axis control: ±160° - 190°
Roll axis control: +50° to -100°
Controlled Rotation Range:
Pan axis control: ±345°
Tilt axis control: ±120°
Roll axis control: ± 45°
In the box
Gimbal S1V3 x 1
Micro USB Cable x 1
SBUS Cable x 1
DJI A3 CAN cable x 1
Pixhawk Cable x 1
S1V3 - Power Supply Cable x 1
S1V3 - Auxiliary Cable x 2
Slide Camera x 1
Camera Screw x 2
Hotshoe x 1
WHY BUY FROM US?
By buying from Ferntech, you'll have the confidence that you are dealing directly with New Zealand's leading drone experts. Our staff are knowledgable drone pilots who offer expert advice, trusted support and superior specialist service. Only through us will you receive a full New Zealand warranty, phone and email support, and access to our certified Repairs Centre with DJI-qualified drone technicians. And we guarantee that we will have the best prices on the market — if not let us know and we will match any price (conditions apply).
Warranty Details
Standard warranty
Is the Gremsy series waterproof?
No
How many operation modes does the S1 have and how do I switch among the modes?
Gremsy S1 supports only normal operation
Is it possible to quickly disassemble/assemble Gremsy S1 under drone?
Yes, it is. Gremsy S1V3 supports quick release for quick disassemble/assemble under drone.
Is the S1V3 quick release the same with T3V3 and T7?
Yes, it's the same. You can swap among these gimbals.
There's currently no reviews for this product, be the first to write one.