Nextcore Lumos XM120 (LiDAR)
At 1.5kg the Lumos XM120 is the lightest and most powerful system in the range. The Lumos 120XM has a precision of 30mm and an accuracy of 40mm. It supports triple returns resulting with high accuracy and greater detail for high-quality survey models.
Features
The Lumos 120XM is a new generation of UAV LiDAR solution. At 1.5kg the Lumos XM120 is the lightest and most powerful system in the range. The Lumos 120XM has a precision of 30mm and an accuracy of 40mm. It supports triple returns resulting in data collection with high accuracy and greater detail for high-quality survey models. Lumos XM can be flown at greater altitudes and for a longer duration owing to its lightweight design and powerful return accuracy.
Key differentiators:
• Great flight height
• Supports triple returns
• Lightweight
• Increased flight time
• High point density
Flight Height
The system is able to be flown at higher altitudes, reducing scanning time and increasing the safety margin between the drone and obstacles on the ground like trees and powerlines.
Triple return
With its class beating flight height and triple returns, the Lumos XM is the superior system for operating in steep, rugged terrain and through thick vegetation.
Lightweight
The Lumos XM being lighter in weight allows increased flight time, thus facilitating more efficient performance.
UAVs
Designed for the DJI M300 but can be fitted to many other units capable of the same lift capacity like:
• Acecore Technologies Noa
• Acecore Technologies Zoe
• Inspired Flight 1200
• FreeFly Alta8
• Skyfront Perimeter8
• Doosan DS30
• Harris Aerial
A New Generation of UAV LiDAR
The Nextcore Lumos series is manufactured in Australia and our systems are the only UAV LiDAR units to come with a 2-year warranty. Lumos products are built for purpose and tested by our survey team who ensure that our systems are rugged and capable in all scenarios. Price, performance and ease of use distinguish the Lumos series from anything else on the market.
Product Specifications
Quick Specifications
Combined System Accuracy (RMSE): 40mm
Combined System Precision (RMSE): 30mm
System Range: 300m (≈985ft)
Flight Height (AGL): 120m (≈395ft)
LiDAR Sensor
Wavelength: 905nm
Laser Class: Class 1 eye safe
Channels: 32
Total Range: 300m
Range Capabilty (Low Relfectivity): 80m @10% Reflectivity
Range Accuracy: 1cm
Range Precision: ±0.5cm
FOV (Vertical): 40.3°
Frame Rate: 20Hz
Returns: Triple return up to 1,920,000 points/sec
Navigation System
Horizontal Position accuracy (PPK): 0.01m
Vertical Position accuracy (PPK): 0.015m
Velocity Accuracy (PP): 0.05m/s
Roll & Pitch Accuracy (PP): 0.01°
Heading Accuracy (1m Antenna Sepration): 0.01°
Navigation Update Rate: 200Hz
Supported Navigation Systems:
GPS L1, L2
GLONASS L1, L2
GALILEO E1, E5b
BeiDou B1, B2
Supported SBAS System:
WAAS, EGNOS,
MSAS, GAGAN,
QZSS
GNSS Update Rate: 8Hz
Hot Start Fix: 3s
Hot Start Battery Capacity: 48hrs
Cold Start Fix: 30s
Platform
Weight: 1.5kg
Dimensions: 163mm x 160mm x 155mm
Operating Temperature: -20°c to +55°c
Operating Voltage: 12-34V
Power Consumption (Typical): 10W
Suggested Operating Examples
Flight Speed: 5m/s
Flight Height: 120m
Maximum Swath Width: 180m
In the box
Nextcore Lumos XM120 (LiDAR) × 1
Antenna kit for M300 × 1
M300 dampener extensions × 1
64GB USB × 1
Lumos Cable Set × 1
Small tool kit for payload UAV × 1
integration × 1
Pelican travel case × 1
WHY BUY FROM US?
By buying from Ferntech, you'll have the confidence that you are dealing directly with New Zealand's leading drone experts. Our staff are knowledgable drone pilots who offer expert advice, trusted support and superior specialist service. Only through us will you receive a full New Zealand warranty, phone and email support, and access to our certified Repairs Centre with DJI-qualified drone technicians. And we guarantee that we will have the best prices on the market — if not let us know and we will match any price (conditions apply).
Warranty Details
2-year warranty
There's currently no reviews for this product, be the first to write one.
