DJI Power 2000 (NZ)

2048Wh Portable Power Station

The new DJI Power 2000 portable power station packs 2048Wh high capacity into a compact size. Its 3000W output powers most household appliances effortlessly. Recharge to 80% in just 55 minutes using AC power, or opt for solar and car recharging. Highly expandable, it can be extended up to 22,528 Wh, providing flexible power for home backup, road trips, RVs, film and TV production, and more. Featuring a board-level sub-nano coating for enhanced safety, it can also be controlled remotely using an app, ensuring power usage stays convenient.

Big Power, Compact Size

DJI Power 2000 offers a generous 2048Wh capacity in a compact 16-inch mini carry-on size, easily fitting into any car or trunk. Ports, buttons, and screens are integrated on the front of the unit, making operation convenient, saving space and keeping things neat during storage. It can connect up to ten 2048Wh expansion batteries ^[5], boosting the capacity to an incredible 22,528 Wh ^[6].This powerhouse is ideal for both daily backup and emergent household power needs.

Genuine 3000W Continuous Output

DJI Power 2000 can steadily maintain a 3000W output until battery runs out, reliably running over 99% of household appliances such as induction cookers, microwaves, and ovens ^[7]. With four AC output ports, four USB-C ports, and four USB-A ports, it enables simultaneous, effortless charging of multiple phones, tablets, and high-power appliances.

2048Wh Capacity Charging Ability

^{* Measured under 25° C (77° F) laboratory conditions, using DJI Power 2000 to charge products of certain brands. The data is for reference only. Actual user experience may vary.}

Fast and Flexible Recharging

DJI Power 2000 can be recharged via grid power, solar power, and car power, as well as intelligent hybrid recharging. Whether indoors or on the go, you can choose the best charging method, ensuring a reliable power supply and greater convenience.

Grid Power

It's fast and easy to plug in, recharge, and go. When connected to grid power, it supports fast recharging up to 1800 W, taking only 55 minutes to go from zero to 80% ^[1], and 90 minutes to full ^[1]. Even if you start charging it right before heading out, it gives you the confidence to be able to set off whenever you need.

Solar Power

Economical and environmentally friendly, DJI Power 2000 can be rapidly recharged with up to 1800 W ^[8] of solar power using the DJI Power 1.8kW Solar/Car Super Fast Charger ^[5], taking only 75 minutes ^[9] to charge from zero to full.

Car Power

Easily supercharge any road trip with the DJI Power 1kW Super Fast Car Charger ^[5] or the 1.8kW Solar/Car Super Fast Charger ^[5]. These chargers use excess electricity from your car's alternator to quickly recharge the Power 2000, suitable for regular cars and RVs ^[26]. It takes just 145 minutes ^[10] to charge the power station from zero to full.

Intelligent Hybrid Recharging

Recharging with both AC and DC is economical, green, and highly efficient. While using grid power, you can recharge the Power 2000 with solar and/or car power. Recharging power increases to 2200 W, and with an expansion battery ^[5] it can reach 3000 W ^[11]. Intelligent charging prioritises clean solar power to help reduce electricity bills. This is useful for RV ^[26] camping and emergency power needs.

UPS Mode: Seamless Power Backup

When an electrical device is connected to a powered-on DJI Power 2000 via an AC output port and both are receiving grid power, the Power 2000 defaults to UPS mode. If a power outage occurs, it can start powering the connected device(s) within 0.01 seconds ^[12], ensuring continuous operation.

Grid-Tied Energy Storage

DJI Power 2000 can connect to the grid* without additional accessories and integrate with balcony solar systems. Recharge the power station with solar panels ^[4] during the day, and once fully charged, excess electricity is fed into the grid.
^{* When grid-tied, the output power is 800 W and the AC ports are not functional. For supported countries, refer to the FAQ page.}

Advanced Safety and Ultra-Quiet Operation

In Standard Recharge Mode, DJI Power 2000 produces no more than 30 dB of sound, quieter than most household refrigerators ^[13]. This supports quiet overnight charging.

All-Around Safety

DJI Power 2000 prioritises safety through its body structure, cell chemistry, software, and power management. It maintains battery level even when turned off and is ready for immediate use ^[14]. It also includes up to 5 years of warranty ^[4].

The battery cell uses LFP chemistry, which is safe and non-explosive even if punctured. It retains 80% capacity after 4000 cycles ^[15], offering up to ten years of use ^[16].

The BMS system includes 26 temperature sensors and operates normally up to 45°C (113°F) ^[12]. There are also 21 fuses for circuit protection, with automatic shutdown if thresholds are exceeded.

A sub-nano coating enhances battery protection, and a new potting process protects the inverter so it remains safe in rain, condensation, and salt spray ^[17], supporting reliable use at the seaside or at high altitudes ^[18].

The power station uses flame-retardant materials and has a static pressure bearing capacity of up to 1 ton ^[12], ensuring durable performance even under impact.

Certified for Greater Preparedness

DJI Power 2000 is certified by the Japan Fire and Disaster Prevention Association, making it a strong option for disaster readiness.

Versatile Solutions for Every Scenario

DJI Power 2000 includes two complete SDC ports for expansion and can pair with accessories such as expansion batteries, fast chargers, and high-speed charging cables for drones. It supports home backup, camping, RV travel, and film production.

Home Backup Power
Power 2000 supports up to ten 2048Wh expansion batteries ^[5] for a total capacity of 22,528 Wh ^[6]. It can also recharge quickly using up to 1800 W of solar power ^[8] via the 1.8kW Solar/Car Super Fast Charger ^[5], providing a cost-effective home energy solution.

Camping & Short Road Trips
The DJI Power 1kW Super Fast Car Charger ^[5] uses the car's alternator to recharge Power 2000 at up to 1000 W ^[20], taking about 145 minutes ^[10]. Once at your campsite, you can run lights, mini fridges, induction cookers, and more.

RV & Long Road Trips
The 1.8kW Solar/Car Super Fast Charger ^[5] supports solar panels and an RV's alternator ^[26], providing up to 1200 W solar power plus 600 W car power. It can fully recharge Power 2000 in about 75 minutes ^[21]. Hybrid charging at campsites keeps power continuous throughout the trip.

Film and TV Production
With 2048 Wh of capacity, Power 2000 can run photography and lighting gear and deliver up to 240 W SDC charging ^[3] for select DJI drone batteries ^[22], enabling takeoff in around 30 minutes and improving efficiency ^[23].

Remote Control via App

Power 2000 connects to the DJI Home app for remote control, AC switching, parameter adjustment, status monitoring, and viewing expansion battery or charger details. This allows smarter and more efficient device management.

Extensive Accessories

DJI Power 2000 includes dual 140 W USB-C ports ^[24], dual 65 W USB-C ports, four USB-A ports, four AC output ports, two SDC ports, and two 1/4" threaded ports for flexibility across accessories, solar panels, power cables, and adapters.

Notes

1. Data tested under laboratory conditions at 25° C (77° F) and should be used for reference only. To achieve the maximum grid recharging power of 2200 W, the battery level of the power station must be between 50% and 80%, and the ambient temperature should be between 20° to 40° C (68° to 104° F).

2. Compared with DJI Power 1000.

3. Requires certain accessories, which are sold separately.

4. DJI Power 2000 units purchased from the DJI Store will have a three-year warranty, which can be extended by an additional two years after first connecting to the DJI Home app. Consult customer service on DJI Store for more details.

5. Sold separately.

6. DJI Power 2000 can connect up to ten expansion batteries, which provide up to 22,528 Wh when fully charged.

7. Device power does not exceed 3000 W.

8. DJI Power 1.8kW Solar/Car Super Fast Charger's MC4 Solar Panel Cable supports up to 1200W solar input. In the meantime, its XT90 Car/Solar Charging Port can be expanded to an MC4 connector using the separately sold DJI Power 1.8kW Super Fast Charger XT90 to MC4 Adapter Cable, providing an additional 600W solar input.

9. Measured under 25° C (77° F) laboratory conditions when recharging the power station at a maximum solar power of 1800 W with the separately sold DJI Power 1.8 kW Solar/Car Super Fast Charger and XT90 to MC4 Adapter Cable.

10. Measured at an ambient temperature of 25° C (77° F) when the 1kW Super Fast Car Charger connects to a 12V or 24V car system and recharges DJI Power 2000 with car power at a maximum power of 1000 W. This data is for reference only. Actual user experience may vary. Data was tested in a controlled laboratory environment.

11. The maximum recharging power of 3000 W is achieved when the power station is recharged with both AC power from the grid and DC power using 1.8kW Super Fast Charger or 1kW Super Fast Charger. AC recharging power may vary in different countries.

12. Data was tested in a controlled laboratory environment.

13. Measured under 25° C (77° F） laboratory conditions, with the power station placed on the floor of a soundproof room, and the noise tested 1 meter away from the power station while the power station is being charged in the Standard Recharge Mode. Maximum value was taken from the process data.

14. Under 25° C (77° F) laboratory conditions, after being stored for one month while powered off, the battery level drops by only 2%.

15. One cycle is defined as a complete charge and discharge. Tested in a 25°C (77°F) laboratory environment, with DJI Power 2000 recharged in Standard Mode and discharged at 2000W output power to external devices.

16. Based on the correct usage of the product, DJI Power 2000 will have an approximate lifespan of 10 years, calculated on the basis of completing one full recharge/discharge cycle nearly every day. This data is for reference only. Actual user experience may vary.

17. To ensure product performance, do not operate the power station a rainy environment for more than 3 minutes, in a condensation environment for more than 30 minutes, or in a salt fog environment for more than 8 hours. Avoid exposing it to condensation or salt fog for extended periods.

18. Supports use at altitudes up to 5000 m. Supports use in environments as low as -10° C (14° F). Data was tested in a controlled laboratory environment.

19. The power station can continue to function normally after being held with both hands and dropped from a height of 50 cm onto dry mud.

20. At ambient temperatures between 0° to 45° C (32° to 113° F), the 1kW Super Fast Car Charger can recharge DJI Power 2000 at a maximum power of 1000 W via the car's alternator. Data was tested in a controlled laboratory environment.

21. Measured at an ambient temperature of 25° C (77° F) when the 1.8kW Super Fast Charger connects to a 12V or 24V car system and recharges DJI Power 2000 at a max 1200W solar power plus 600W continuous car power. This data is for reference only. Actual user experience may vary. Data was tested in a controlled laboratory environment.

22. For more details on fast-charge-supported DJI drones, refer to the FAQ page.

23. When charging the DJI Matrice 4 Series Battery with the DJI 100W USB-C Power Adapter and the DJI Matrice 4 Series Charging Hub, the charging power is 100 W. When charging the battery using DJI Power 2000 and the DJI Power SDC to DJI Matrice 4 Series Fast Charge Cable, the charging power is 200 W, thus doubling the charging efficiency.

24. The USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications.

25. Both the DJI Power 1.8 kW and 1 kW Super Fast Chargers can stabilize the battery voltage at 13.5 V. Depending on the voltage status, they can either recharge the Power 2000 (when the voltage is above 13.5 V) or supply power from the Power 2000 to the battery (when the voltage is below 13.5 V). Hybrid and fully electric vehicles are currently not compatible with DJI Power 1.8kW Solar/Car Super Fast Charger or DJI Power 1kW Super Fast Car Charger, due to differences in generator operation compared to traditional fuel-powered vehicles.

26. In different countries or regions, a compatible power adapter cable needs to be purchased separately.

Product Specifications

General

Model: DYM2000L/DYM2000H
Cell Chemistry: LFP (lithium ferrophosphate)
Capacity: 2048 Wh
Cycle Life: Maintains over 80% capacity after 4000 cycles.

^{Measured at 25℃/77°F room temperature, being recharged in the Standard Recharge Mode, and at an output power of 2000 W.}
Net Weight: Approx. 22 kg
Dimensions: 448×225×324 mm (L×W×H)
Number of Ports: AC Output × 4
USB-C × 4
USB-A × 4
SDC × 2
AC Input × 1
Max Operating Altitude: 5000 m
 

Output Specifications

AC Output: DYM2000L: AC 100-120 V, 25 A, 50/60 Hz
DYM2000H: AC 220-240 V, 13.6 A, 50/60 Hz

^{AC output data varies by country and region.}
AC Output (Bypass Mode): DYM2000L: AC 100- 120 V, 12 A
DYM2000H: AC 220-240 V, 10 A
USB-A Output: 5 V, 3 A
9 V, 2 A
12 V, 2 A
Max output power per channel: 24 W

^{Supports QC 2.0 and QC 3.0 protocols with a maximum output power of 24 W when only 1 port is used; when 2 or more ports are used simultaneously, each port defaults to 5 V/2 A/10 W output, and negotiated high voltage is not supported.}
USB–C Output: 5 V, 5 A
9 V, 5 A
12 V, 5 A
15 V, 5 A
20 V, 5 A
28 V, 5 A (EPR)
C1 and C2 port max output power: 140 W*
C3 and C4 port max output power: 65 W

<sup>From left to right, the max output power for C1 and C2 ports is 140 W, and for C3 and C4 ports is 65 W.
* Each USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications.</sup>
SDC Output: SDC 1 and SDC 2: 9-28 V, max current: 12 A

^{Both of the SDC 1 and SDC 2 ports support extensive accessories.}
AC Input: DYM2000L: AC 110-120 V, max current: 15 A
DYM2000H: AC 220-240 V, max current: 10 A
 

Input Specifications

SDC Input: SDC 1 and SDC 2: DC 32-58.4 V, max current: 60 A

^{Both of the SDC 1 and SDC 2 ports support extensive accessories.}
 

Operating Temperature

Power Supply Temperature: -10° to 45° C (14° to 113° F)
Recharging Temperature: 0° to 45° C (32° to 113° F)
Storage Temperature: -10° to 45° C (14° to 113° F)
 

Wi-Fi and Bluetooth

Transmitter Power (EIRP): Wi-Fi (802.11 b/g/n): 2.4000-2.4835 GHz: < 20 dBm (FCC/CE/SRRC/MIC)
Bluetooth 5.0: 2.4000-2.4835 GHz: < 7 dBm

^{The supported operating frequency bands and their corresponding availability vary by country/region. For details, please refer to local laws and regulations.}

In the box

DJI Power 2000 × 1
DJI Power AC Power Cable × 1
Documents × 1

WHY BUY FROM US?

By buying from Ferntech, you'll have the confidence that you are dealing directly with New Zealand's leading drone experts. Our staff are knowledgable drone pilots who offer expert advice, trusted support and superior specialist service. Only through us will you receive a full New Zealand warranty, phone and email support, and access to our certified Repairs Centre with DJI-qualified drone technicians. And we guarantee that we will have the best prices on the market — if not let us know and we will match any price (conditions apply).

Warranty Details

5 year warranty*

*DJI Power Station comes with 3 years warranty, and can be extended to 5 years warranty once customers register DJI Power Station SN on DJI service webpage.

General

What is the UPS mode of DJI Power 2000? How do I use it?
UPS, short for Uninterruptible Power Supply, is mainly used to supply power to devices through DJI Power 2000 when there is a power outage and prevent accidents that might otherwise be caused.
When electrical devices are connected to the powered-on DJI Power 2000 and both are receiving grid power, press the AC button on the power station and ensure that the AC output indicator shows solid light, then DJI Power 2000 defaults to UPS mode. DJI Power 2000 can start powering the connected devices within 0.01 seconds. You can decide whether to use this mode based on the device(s) you are using.

What is the warranty period of DJI Power 2000?
The default warranty period is three years. You can get an additional two-year warranty period by downloading the DJI Home app, and completing the first connection.

How should I maintain DJI Power 2000 and optimize its life span?
DO NOT store the power station for an extended period after fully discharging. Otherwise, the battery may over-discharge and cause irreparable damage to the battery cell.
For long-term storage, please recharge the product to 100% and then discharge it to approximately 60%. Storing with high battery level for a long duration can cause the battery to age more quickly, while storing with low battery levels can cause over-discharge.
Then, recharge and discharge it once roughly every four months: First, discharge the power station to 15%, power off, and wait for two hours or longer. Then, recharge it to 100% using the Standard Recharge Mode in order to maintain the power station.

What should I do if an error code appears on the power station?
If an error code appears on the power station display, you can connect to the DJI Home app to check the specific issue and solution, or visit the DJI Power Series Product Support for more details.

What considerations should be taken when using the power station in low-temperature environments?
The power supply capability will be affected in low-temperature environments, and the input and output power will decrease.

Recharging

What recharging methods does DJI Power 2000 support?
AC power:
Recharging with grid power through the AC input port.
DC power:
1. Recharging with car power from the car's alternator using the DJI Power 1kW Super Fast Car Charger;
2. Recharging with solar power and/or car power from the car's alternator using the DJI Power 1.8kW Solar/Car Super Fast Charger ;
3. Recharging with solar power via the DJI Power Solar Panel Adapter Module (MPPT) and solar panels.

What should be noted when using DC/AC hybrid recharging for DJI Power 2000?
DJI Power 2000 supports simultaneous DC and AC recharging, with up to 2200 W of recharging power for the power station itself. When connected to an expansion battery, the recharging power can reach up to 3000 W. The maximum recharging power of 3000 W is achieved when the power station is recharged with both AC power from the grid and DC power using 1.8kW Super Fast Charger or 1kW Super Fast Charger. AC recharging power may vary in different countries.

Power Supply

How can I achieve the maximum output power when supplying power through the USB-C port?
The USB-C port supports a maximum output of 140W. The connected device must support the PD 3.1 protocol and be used with a USB cable that complies with the USB EPR.
Taking a 16-inch MacBook Pro as an example, if you use a regular USB-C charging cable, the maximum power transmission is only 100 W. It can only reach 140 W when using the standard magnetic cable.

How do I enable AC power output? How many modes are there?
After turning on the power, you can press the AC button to enable AC output, or you can enable it remotely in the DJI Home app.
If you press the AC button once, its indicator will blink slowly. AC output will automatically shut down to save electricity if the power station is not charging any device via the AC output ports within half an hour.
If you press and hold the AC button, its indicator will show solid light, and AC output will not automatically shut down.

How long does it take for DJI Power 2000 to turn off if it is not supplying power?
You can set the auto-off time in the DJI Home app. If there is no continuous output, it will automatically turn off after 30 minutes by default.

Accessories

What functions are supported with the SDC ports?
DJI Power 2000 has two complete SDC ports, both capable of the following function expansions:
Recharging:
1. Recharge the power station with up to 1000W car power using the DJI Power 1kW Super Fast Car Charger.
2. Recharge the power station with up to 1800W solar power or up to 1200W solar power plus 600W car power using the DJI Power 1.8kW Solar/Car Super Fast Charger.
3. Recharge the power station with up to 400W solar power using the DJI Power Solar Panel Adapter Module (MPPT).
4. Recharge the power station with a car’s power outlet via the DJI Power Car Power Outlet to SDC Power Cable (12V/24V).
Capacity expansion:
1. Expand capacity with DJI Power Expansion Battery 2000, connecting up to 10 expansion batteries to expand up to 22528 Wh.
Power supply:
1. Quickly charge intelligent flight batteries of the DJI Matrice 4 Series, Mavic 3 Series, Air 3 Series, Matrice 30 Series, and Inspire 3 using the corresponding fast charge cable.
2. Supplying power to car-powered appliances via the DJI Power SDC to Car Charger Plug Power Cable.
3. Charging model aircraft batteries outdoors by connecting to the balance charger (model aircraft battery balance charger) via the DJI Power SDC to XT60 Power Cable (12V).

What should be noted when using the DJI Power SDC fast charging function for DJI drones?
After the flight, wait until the drone battery has cooled down before connecting it to the corresponding DJI Power SDC fast charging cable; otherwise, charging speed may be affected.
Since the final 5% of charging a drone battery (from 95% to 100%) is completed via trickle charging, the charging speed is relatively slower. You can consider using the battery after it is charged to 95%, as the operating time will not be significantly less than it is when fully charged.